Originally constructed in 1936, the bridge is safe for the traveling public but is nearing the end of its useful service life. In addition to removing and replacing the existing bridge, the project will:

• reconstruct approximately 1,055 feet of roadway approaching the new bridge;

• install traffic barriers and a new stormwater management facility and

• upgrade signage, pavement markings and landscaping.

Upon completion, the new two-lane bridge also will include wider shoulders. The MD 5 bridge replacement project is part of the State Highway Administration’s system preservation program, which supports safety and mobility for Maryland’s travelers and maintains the state’s transportation network.

 

MD 5 project location

​

During initial weeks of construction, crews will direct traffic using a daytime flagging operation as they deliver and install equipment. A temporary signal will be installed and remain in place throughout the construction phase to alternate traffic through a single lane.

Crews will work behind concrete barriers to replace the bridge in stages during off-peak travel periods. Work times may be adjusted pending the project schedule. Contractor Martins Construction Corporation, of Falls Church, Va., will perform the work. Learn more about the project here​.

The State Highway Administration appreciates customers’ patience during construction as we work to improve Maryland’s transportation system. Drivers are asked to stay alert, stay focused and be aware of reduced speed limits and changing driving patterns in the work zone. Slow down and move over in work zones. It’s the law. Motorists in need may dial #77 on their mobile devices for assistance.

 

For a list of all major State Highway Administration projects, go to the Project Portal, or visit the homepage at roads.maryland.gov. For real-time traffic conditions, go to md511.maryland.gov.